Crosby L-320AN Alloy Eye Hooks (brown)
Crosby L-320AN Alloy Eye Hooks (brown)
SKU:C1022380
Couldn't load pickup availability
- Description
- Reviews
Description
FULL PULL ROPE / RIGGING HARDWARE
Crosby L-320AN Alloy Eye Hooks
An alloy eye hook for properly designed lifting and rigging assemblies. Choose from five offered working load limits, from 1 to 11 metric tonnes, and check the eye and latch opening against your connecting hardware before ordering.
Marked working load limit
The hook carries its WLL marking. Match the selected capacity and stock number to your application.
QUIC-CHECK® indicators
Deformation and angle markings assist inspection and rigging checks.
5:1 design factor
Crosby specifies a 5:1 design factor for the alloy hook capacities offered here. This does not permit loading above the marked WLL.
Available sizes & specifications
Only the sizes offered on this page are shown. Dimensions Q and O refer to the Crosby drawing linked below; O is the opening with the S-4320 latch configuration.
| WLL (t) | Frame | Crosby stock no. | Weight (lb) | Inside eye Q (in) | Opening O (in) |
|---|---|---|---|---|---|
| 1 | D | 1022380 | 0.61 | 0.75 | 0.87 |
| 2 | G | 1022402 | 1.44 | 1.13 | 0.91 |
| 3 | H | 1022413 | 2.07 | 1.29 | 1.09 |
| 5 | I | 1022424 | 4.30 | 1.56 | 1.37 |
| 11 | K | 1022446 | 15.00 | 2.44 | 2.21 |
WLL is stated in metric tonnes (t). Values follow Crosby’s imperial catalog and the linked specification sheets. Dimensions are in inches and weights are in pounds. Use the actual hook’s markings and applicable Crosby instructions.
Selection & safe use
- Seat the load in the hook bowl. The latch must not carry the load.
- Do not side-load, back-load or tip-load the hook.
- Inspect before use and follow Crosby’s inspection and removal-from-service instructions.
- Crosby notes that these eye hooks are designed for wire rope or chain. Synthetic materials can reduce assembly efficiency; confirm compatibility and the complete assembly rating before use.
Specifications & instructions
Reviews
